Description
A M4P-3 module is an interface for 4 half-bridge standard probe inputs.
Each probe input interface is provided with an electronic circuit optimised for fast measurement to convert the probe DC signal voltage.
The output signals are of analog type (V / mm).
The standard gain is 1V/mm but can also be set to 2.5, 5 or 10V/mm (see user manual).
The interfaces can be assembled together on a DIN 7.5x35 rail.
The power supply can be either via the S48001719 power supply (to be ordered separately) which can supply up to 10 interfaces or via an external power supply on the front panel which must provide 0.1A per connected interface.
Specification
| Maximum permissible errors | ± 0,5 % according to the measuring range |
| Dimensions | 75x155x40 mm |
| Degree of protection | IP40 (CEI 60529) |
| Particular characteristic | Sensivity: 73,75 mV / V / mm |
| Weight | 400 g |
| Power supply | 24 Vdc (+/- 9V) |
| Remark | The mains cable for the power supply must be ordered separately: - 03160016 for the EU version - 03160015 for the CH version - 03160017 for the universal version with wire outlet. |
| Data output | The analog output signal is delivered via a 9p female Sub-D connector on the front. |